Moyno

Moyno, Inc. is a global leader in the design and development of the progressing cavity pump. Its technological advancements have resulted in superior fluids handling solutions for a wide range of applications including water-like liquids and shear-sensitive fluids, as well as viscous, abrasive, solids-laden slurries and sludges.

Through advanced, in-house research and development, experienced engineers apply innovative design enhancements that differentiate Moyno products from the competition. The resulting enhanced customer value stems from the combination of proprietary Moyno Ultra® Technologies and extensive application knowledge.

In addition to handling transfer, feed and metering applications with its extensive line of Moyno, R&M progressing cavity pumps, Moyno also offers proprietary equipment and systems for multiphase fluid transfer applications. Patented Moyno single-shaft and twin-shaft grinders are also available for effective solids reduction.

Moyno 500 Pumps

Moyno 500 Pumps

  • Compact and lightweight design for installation flexibility
  • Motorized and non-motorized models ideal for OEM applications
  • Self-priming
  • Quiet operation
  • Low maintenance
  • Mag Drive 500 series uses a patented, sealless technology to provide zero leakage
500 Sanitary Pumps

500 Sanitary Pumps​

  • Accurate, repeatable, non-pulsating flow for shear-sensitive applications
  • Application versatility, from clean, clear liquids, additives and flavorings to viscous and abrasive fluids
  • Design simplicity and premium components for reduced maintenance and replacement
  • Quick disassembly clamp for easy cleaning
  • Sanitary and cost-saving Hygienic models available
  • Bare Shaft and Close-Coupled models available
1000 Pumps

1000 Pumps

  • Low-maintenance drive trains with sealed and lubricated pin-type universal joint for extended service life
  • Two-piece shaft design allows easy mechanical seal and pump maintenance
  • Standard flange, close-coupled and open throat hopper models
  • Highest grade components include Ultra-Shield® rotor coatings and Ultra-Flex® stator elastomers on all models
Moyno 2000 Pumps

Moyno 2000 Pumps

  • fluid Type
    • Broad range of viscosities and solids
  • fluid Supply
    • Via standard pipe
  • benefits
    • Best value for majority of applications
  • typical Applications
    • Oil
    • Polymers
    • Municipal sludge to 10% solids
    • Titanium Dioxide
    • Paper coatings
    • Mining Slurries
2000 CC Pumps

2000 CC Pumps

  • Compact, close-coupled configuration is cost-effective yet robust
  • Low total cost of ownership
  • Optimized rotor/stator pumping elements require less energy consumption and reduce the potential for plugging and costly down time
  • All internal parts interchangeable with other Moyno 2000 pumps
  • Integral gear motors pinned to the pump drive shaft and access ports allow easy assembly and disassembly
  • DIN Standard 24960 and ISO 3069 single mechanical seals
2000 HS System

2000 HS System

  • fluid Type
    • High-viscosity and high-solids
  • fluid Supply
    • Via suction hopper of Twin Screw Feeder (TSF) and chutes
    • Capable of varying TSF length to match wide feed areas from centrifuges and 1 through 2-meter length belt filter presses
Grinders

Grinders

  • Twin shaft grinder with hardened steel cutters
  • Patented spacers with cutting teeth for greater cutting efficiency
  • Mechanical seals and bearing mounted on single stainless steel sleeve for quick on-site replacement of worn components without purchasing complete cartridge designs
  • Dimensionally retrofits other twin shaft grinders
  • Prevents line blockages, clogging, ragging and inconsistent particle size
  • Electronic control package for reduced overload risk
  • Low total cost of ownership
  • Flow rates from 300 to 4,250 GPM or .43 to 6.12 MGD
AugMentor®

AugMentor® 

  • Pump and grinding operation in a single, compact package
  • Maximizes processing
  • Large surge capacity hopper
  • Easy disassembly of cutter shafts and pump internals
  • Requires minimal maintenance
  • Reduces overall cost of ownership
  • High flow rates
  • Fast process times through three stages of solids reduction
Chopper Hopper

Chopper Hopper

  • Compact, close-coupled configuration is cost-effective yet robust
  • Low total cost of ownership
  • Optimized rotor/stator pumping elements require less energy consumption and reduce the potential for plugging and costly down time
  • All internal parts interchangeable with other Moyno 2000 pumps
  • Integral gear motors pinned to the pump drive shaft and access ports allow easy assembly and disassembly
  • DIN Standard 24960 and ISO 3069 single mechanical seals
L-Frame Pumps

L-Frame Pumps

  • Low total cost of ownership
  • Simple pin-type universal joint drive assembly for easy maintenance
  • Application versatility, modular design and wide selection of materials of construction
  • Steady flow under wide NPSH variations
  • Variety of Ultra-Shield® rotor coatings and Ultra-Flex® stator elastomers
  • Open suction hopper and bridge breaker models available
Chopper Hopper

Chopper Hopper

  • Compact, close-coupled configuration is cost-effective yet robust
  • Low total cost of ownership
  • Optimized rotor/stator pumping elements require less energy consumption and reduce the potential for plugging and costly down time
  • All internal parts interchangeable with other Moyno 2000 pumps
  • Integral gear motors pinned to the pump drive shaft and access ports allow easy assembly and disassembly
  • DIN Standard 24960 and ISO 3069 single mechanical seals
Metering Pumps

Metering Pumps

  • Dust and water resistant; works well in dirty, wet environments
  • .5 – 5 HP capability
  • 10:1 speed range
  • 1 or 3 phase
  • Compact and rugged design
  • UL and cUL listed and CD marked
  • 4-20mA input for feedback control
  • IP55 and IP55/NEMA enclosures are standard
  • Handles simple drive function commands to more demanding positioning controls
  • LED external displays are visibly and ergonomically user friendly
  • Handles abrasives, corrosives, solids in suspension and viscous fluid
  • Self-priming, high suction lift capability
  • Low shear pumping action
  • Low power consumption and operating costs
  • No valves to clog, stick or vapor lock
  • Pressure capability is independent of speed
PowerFlow™ Pump

PowerFlow™ Pump

  • Hardened tool steel pumping elements with cast iron body or hardened 17-4 PH stainless steel pumping elements with 316 stainless steel body
  • Specially designed seal chamber to allow for free draining and higher fluid circulation
  • Proprietary Moyno Power Seal™ single mechanical seal for long life and superior performance in heavy-duty applications
  • Conventional stuffing box available with packing material options
Replacement Parts and Service

Replacement Parts and Service

  • Precisely and consistently meet all Moyno standards & tolerances
  • Deliver optimal performance due to accurate form & fit
  • Extend pumping element wear life & lower total cost of ownership
  • Offer superior tensile strength & abrasion
Products for Wastewater Treatment

Products for Wastewater Treatment Moyno Products​

  • Moyno 2000 HS System - Handles filter cakes with a higher percentage of solids at higher pressures than any other PC pump; Twin screw feeder for positive fill; Advanced control packages
  • Moyno 2000 Pump - Crowned gear universal joint drive assembly with patented seals; Optimized pumping elements with Ultra-Shield® rotor coatings and Ultra-Flex® stator elastomers
  • Moyno 2000 CC Pump - features a close-coupled design with a sealed gear-type universal joint drive train
  • Moyno 1000 Pump - Sealed and lubricated pin joint drive train
  • Moyno Metering Pump - Pulsationless, repeatable flow rates
  • Moyno 500 Pump - Compact, lightweight utility pump
  • Moyno Annihilator Grinder - Twin shaft grinder with patented spacer/cutter assembly
  • Moyno Pipeliner Grinder - Single shaft grinder with self-adjusting cutters
  • Options - Fiber Deflector to prevent pump ragging; Shaft Sleeve to protect drive shaft from wear in highly abrasive applications; Flush Gland that permits controlled leakage of process or flush fluid; Control Packages with advanced, integrated touch screens; Fluid Detection Systems to prevent run-dry conditions